| Velocity Precision | 0.001 m/sec or 0.01 ft/sec |
| Resolution | +/-0.1 s |
| Timing Accuracy | +/-0.01 s |
| Velocity Range |
|
| Operating Conditions: | -5 °C to +50 °C (23 °F to +122 °F), non condensing, IP66+, temporary immersion |
| Bluetooth® (optional) | Class 2, output power 2.5 mW (4 dBm), compliant Bluetooth® V1.1 (operating at 2.4 GHz) |
| Communications | RS232 Port (Tx, Rx) @ 19200 baud 8/N/1 (for reload of new firmware only) |
| Connections | 2 x Banana plug sockets (meter input) |
| Visual Indicators |
|
| Power Source |
|
| Dimensions & Mass | 140 x 80 x 50 mm (5,5” x 3,1” x 2”) (L x W x D), 400 g (0.88 lbs) with batteries |
KISTERS’ Point Velocity Display PVD200 is a small electronic device for measuring flow velocity from almost any mechanically rotating current meter. It shows the velocity on its LCD directly in m/sec or ft/sec. PVD200 detects signal shorts automatically and alerts the operator who may decide on repeating the measurement. The device supports up to six current meters, each with three equations.
PVD200 is self-contained and does not need to be connected to an external device. The LCD display and internal buzzer serve as visual and auditory indicators to facilitate conventional current meter measurements and the computation of water velocity. Above that PVD200 cantransmit serial data using an optional wireless bluetooth interface to an external tablet for discharge calculation, etc.
PVD200 is very easy to use and yet versatile enough to offer selections to operate in a wide variety of scenarios and field settings. The equations of the current meters can be entered easily via two pushbuttons and a backlit graphic LCD. The slow-speed mode supports extremely slow rotating current meters.
Very accurate measurements by cleaning signals and avoiding noise PVD200 fi lters and cleans incoming noisy signals from any contact closer, e.g. catwhisker and magnetic head meters. The very clean, noise-free signals allow correct counting of the revolutions and thus the more accurate determination of the flow velocity.
“HailSens represents the culmination of years of dedicated research. As the only hail sensor that seamlessly integrates with hailpad data – the gold standard for scientists worldwide.”
Fill out the form and our experts will get back to you shortly.
Countrys
Organizations
Certified
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
